PA CUT - Shape Cutting Software
PA CUT™ is a programming and operating software for laser, waterjet, plasma and oxy-fuel cutting machines. PA CUT™ is fully integrated into the PA CNCs. It offers a wide range of functions and is easy to operate. More than 11 different languages are available.
Features:
- Plate management database + remnant plate management
- Plate angle compensation
- Pre-programmed macro shapes
- ESSI, DIN, DXF and DWG-code import
- Job interrupt and restart at the contour
- Fast true-shape, parquett or grid nesting
- Multi-torch nesting
- Lead-In lead-out editing
- Multitasking (programming and operating at the same time)
- Going backward on the contour
- Automatic lead-in and lead-out
- Part mirroring and rotating
- Individual selection of cutting strategy and cutting sequence
- Real-time view of the cutting process
- Common cutting
- Bridge cutting
- Chain cutting
- Beveling
- English/metric operation
- Optional macro-generator
Multiple Cutting Heads
If your machine has more than one cutting head, you need to nest the parts for each of them. With PA CUT™ it is easy to do that. Just set the cutting heads and PA CUT™ will automatically nest the parts for each cutting head.
Beveling
If your machine has got a bevel head, you can program the chamfer for each element of the contour directly with PA CUT™. You simply go from element to element an set the right chamfer. It is also possible to set the chamfer for the whole contour only once.
Macro Shapes
PA CUT™ offers about 50 pre-programmed macro shapes. You also can add your own shapes to the library by using the optional macro-generator.
Plate Angle Compensation
Normally the plate is not aligned accurately. Therefore PA CUT™ has the function to check the alignment of the plate either manually or automatically and adds this information to the NC-program. So you don't have to align the plate by hand.